HH
08-17-2008, 07:41
I am contemplating my tire and gear choice for my Grand Cherokee Diesel conversion. The 6.2 is NA and I am looking more for mpg. The Jeep currently has 3.73 gears.
My thoughts are to use a 215/85/R16 (60 psi) tire which is tall (30.4"), skinny and will have less rolling resistance than a softer and wider tire. My gear choices are 3.07, 3.55, and 3.73. 3.42 and 3.31 gears are NOT available for the Dana 35 or that would be my choice, of course. I have to repair the front differential anyway, so I will change over both. I am leaning toward the 3.07s. With the 6.2 installed it should weigh about 4000 lbs or less. It has a 700R4 with a manual TCC lock up.
Here is how the engine rpm should compare if my math is right:
3.07 gear - 1866 rpm at 55mph no OD, 1325 rpm at 55mph in OD, and 1566 rpm at 65 mph in OD.
3.55 gear - 2158 rpm at 55mph no OD, 1532 rpm at 55mph in OD, and 1811 rpm at 65 mph in OD.
3.73 gear - 2268 rpm at 55 mph no OD, 1610 rpm at 55 mph in OD, and 1903 rpm at 65 mph in OD.
Thoughts and ideas welcome, will the 3.07 gears be my best choice?
My thoughts are to use a 215/85/R16 (60 psi) tire which is tall (30.4"), skinny and will have less rolling resistance than a softer and wider tire. My gear choices are 3.07, 3.55, and 3.73. 3.42 and 3.31 gears are NOT available for the Dana 35 or that would be my choice, of course. I have to repair the front differential anyway, so I will change over both. I am leaning toward the 3.07s. With the 6.2 installed it should weigh about 4000 lbs or less. It has a 700R4 with a manual TCC lock up.
Here is how the engine rpm should compare if my math is right:
3.07 gear - 1866 rpm at 55mph no OD, 1325 rpm at 55mph in OD, and 1566 rpm at 65 mph in OD.
3.55 gear - 2158 rpm at 55mph no OD, 1532 rpm at 55mph in OD, and 1811 rpm at 65 mph in OD.
3.73 gear - 2268 rpm at 55 mph no OD, 1610 rpm at 55 mph in OD, and 1903 rpm at 65 mph in OD.
Thoughts and ideas welcome, will the 3.07 gears be my best choice?