View Full Version : Will '95 Water Crossover (dual) Fit A '98
joe bleaux
08-12-2008, 15:33
I have a 98 but could only find a used '95 dual thermostat water cross-over manifold and it is out of town and I will drive to get it IF IT WILL FIT.
Anyone know for certain?
Thanks
Joe
DmaxMaverick
08-12-2008, 15:35
It will fit, but is a downgrade, as posted in the other thread.
joe bleaux
08-12-2008, 22:12
Thanks, Dmax.
What other thread? I would like to read it.
Joe
It will fit, but is a downgrade, as posted in the other thread.
joe bleaux
08-12-2008, 22:15
I just now saw the other thread.
The junk yard guy says it is a dual but I will make doggone sure.
Thanks
Joe
Thanks, Dmax.
What other thread? I would like to read it.
Joe
DmaxMaverick
08-12-2008, 23:20
If it's a 95, it's single. Not to say the vehicle wasn't upgraded to a dual, but then it wouldn't be a 95. The duals weren't OEM until late 96, and every model year after. Yes, do verify what he has before burning up that gold to get there. And, don't settle for only an answer. Make sure he describes it to you.
joe bleaux
08-13-2008, 12:12
Thanks, Dmax.
I've been on too many wild goose chases to not make them describe it to me.
In this case, it was NOT the dual.
Joe
If it's a 95, it's single. Not to say the vehicle wasn't upgraded to a dual, but then it wouldn't be a 95. The duals weren't OEM until late 96, and every model year after. Yes, do verify what he has before burning up that gold to get there. And, don't settle for only an answer. Make sure he describes it to you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.