PDA

View Full Version : Broken Starter Housing



joe bleaux
08-10-2008, 13:15
On my 6.2 n.a. van, the starter housing broke. I am thinking of welding it with high nickel rod. Here is a picture and a photobucket link for a larger picture.

Does anyone have any suggestions or comments?

Thanks
http://s140.photobucket.com/albums/r3/joebleaux/?action=view&current=VANSTUFF001.jpg

ActionPaintball
08-10-2008, 18:37
Bevel and weld. You can also come perpendicular with a couple small cones and fill them in as well. Possibly fab an extra support bracket. I am assuming it broke because one or more bolts were loose?

joe bleaux
08-11-2008, 11:36
Thanks for the suggestions, ACP. Cones?

I don't know why it broke, I suppose one was loose but the other wasn't.

Joe


Bevel and weld. You can also come perpendicular with a couple small cones and fill them in as well. Possibly fab an extra support bracket. I am assuming it broke because one or more bolts were loose?