injector

[brian wafer]

hi i need information on injectors,bought 8 new nozzils,installed myself,got them check at school 6 off them had 1600lbs one was 1500lbs a last was 1400lbs i would like too know , where do i find shims,is there a chart like so many thousand is equil to so many pounds!and how much pressure is ok! for a smooth idle they should at least be equil.i guess!

[Robyn]

Take the suckers back and have the seller match the set up so they are all the same.

Having that much spread is not good and will cause a SPREAD in cylinder to cylinder timing. Not a good thing.

I dont recommend fooling around with the injectors yourself.
Its not a tough job if you have tha parts and a tools, BUTTTTT when you get a set they should be better matched than that.

[brian wafer]

thanks on your reply robyn! they were my injectors i have replaced nozzels myself, and got them check before installing them. only nozzels are new.