fuel pomp

[brian wafer]

hi! got my fuel pomp today,its an db2 4544 which is for an 86 to 88 heavy duty,since i,m installing a banks turbo kit wondering if 1/4 turn on the metering screw would be too much.

[Robyn]

Follow Banks's Intructions on the install. 1/4 turn should not hurt anything.

You need to drive these things on thwe gauges anyway. :D

Just watch the boost and the pyro and if the little creature starts crawling into the "cripsy zone" back your boot off the loud pedal a bit.

Have fun

Robyn

[brian wafer]

thanks robyn! will do just that goes better with pomp in vise true side door. could you tell me about timing on these motors,somebody has used center punches all over the timing marks on chaincase side flange.since i am installing a gear drive i want the timing on the lines,i should be close but not sure i can distinguish the line,how can i tell if too advance or to retarded,can they be timed and how! thanks