morgan
02-11-2008, 19:18
I am getting some leaky filter housing hoses, and really just want to use this opportunity to move it to a better location. The rear valley area is just a pain to reach for filter changes.
What have you used to move it to the fender wall or maybe a frame rail?
I also hate the filter bottom bleed run-off valve at the front of the engine which is poorly designed. I just changed my t-stat this weekend, and the hose was so short that it wouldn't allow me to remove it after removing the nut that holds it on. That shared stud-post is awful.
thanks guys. I had a major life challenge last July, had to sell my house in one week and move out within 3 weeks. Moved way out to the country with a 150-mile round-trip daily commute, and am just now getting back online for recreational internet use. Glad to see you guys haven't skipped a beat.
What have you used to move it to the fender wall or maybe a frame rail?
I also hate the filter bottom bleed run-off valve at the front of the engine which is poorly designed. I just changed my t-stat this weekend, and the hose was so short that it wouldn't allow me to remove it after removing the nut that holds it on. That shared stud-post is awful.
thanks guys. I had a major life challenge last July, had to sell my house in one week and move out within 3 weeks. Moved way out to the country with a 150-mile round-trip daily commute, and am just now getting back online for recreational internet use. Glad to see you guys haven't skipped a beat.