PDA

View Full Version : Injection Woes



76m880
02-04-2008, 08:06
i have a injection pump here that i cannot get to bleed the injectors, i have fuel to the injector pump but no fuel to the injectors

john8662
02-04-2008, 09:13
Are you getting voltage to the Fuel Shutoff solenoid on the top of the injection pump. This is the #10 AWG wire that is red/pink colored. You can turn the iginition on and then unplug and reconnect the connector to the pump, you should hear a click if the soleniod it functioning. If not, check for power, if power, suspect solenoid, which would lead to no fuel being delivered to the injectors.

J

cwillis
02-04-2008, 18:53
good call. if its not the solenoid you may have a nasty clog in there. try troubleshooting. . . how far fowards can you get fuel? how far back can you go without it?

76m880
02-05-2008, 08:49
this is a new install in my M882 project, i have fuel all the way to the injector pump.

This has a new lift pump,

and the solenoid clicks when i remove the wire that i ran for it

brian wafer
02-06-2008, 18:02
i have a hand activeated pump that i use some times when pump dosen,t prime, i got a gauge on it i pump it to 15lbs and i get a helper to turn over engine while i pump too keeping pressure. mecanical pump is only 6 too 9lbs,hope it can help.