Torque for outer most nut on front IFS axle?

[DA BIG ONE]

Need to know the proper torque for the outer most nut "large" and centered between wheel studs that attaches to the axle stem of the front drive axle c/v assembly clamping the front wheel bearings, & hub together.

Truck is 1999 2500 burb 4wd.

[rjschoolcraft]

This nut should be a 36 mm hex. My 95 manual says 180 lb-ft.

[DA BIG ONE]

Originally posted by ronniejoe:
This nut should be a 36 mm hex. My 95 manual says 180 lb-ft. RJ, Thanks!

[stingthieves]

I use a German spec

"GOO TIN TIGHT"

:rolleyes: