6.5TD Van/Hummer Turbo Options?

[67-72williso]

What aftermarket options are available for this setup? I`m working with a reman casting#12555506 Mfg date 5/27/99.This will be a non computer controled setup in an older truck backed with a NV-4500/NP-205.
Thanks, Willis

[More Power]

The folks at www.peninsularengine.com (http://www.peninsularengine.com) have a few turbo options for the H1, van and RV crowd.

Here's one of them. :)

Jim

http://www.thedieselpageforums.com/photopost/data/500/peninsular01.jpg

[67-72williso]

Thanks, Jim
Willis

[93GMCSierra]

The manifolds on the van H1 application are quite different then they are on the truck, are those manifolds better worse or no different?

[rustyk]

I've had a Peninsular Engine installed in my motor home since 12/06; the obvious difference in the photo is different exhaust headers (mine used the stock exhaust manifolds). In any event, I had Peninsular build-to-spec, with the equivalent GM-8 non-wastegated turbo (up to 11 psi boost, 18:1 CR), new IP, and Hi-Pop injectors - and the Phazer gear drive.

Anyway, pushing 16K lbs. of moving house, the difference between the Peninsular Engine retro and the stock engine is very noticeable - more power, and better economy.