6.2 injector socket

[choots]

What size socket do I need to replace injectors with?

[wade-ve7trw]

30mm size. Go to your local auto parts store and buy a 30mm axle (deep) socket. The proper one has a hex end on it so a person can use a wrench or a bigger socket on it

[Low_Bridge]

look in your box - I had a 30mm for an 80' front wewe car axel but as wade-ve7trw said needs to be deep- Some 30mm are just deep enough- You can get one injector specific but for a loooong dollar - Snap on wanted mucho grande as I remember

[Mikeandwendy74]

On My 1988 6.2, I used the 30 MM deep axle socket for the impact wrench, but what I did to make it fit better on the injector was to grind the outside of the socket, you'll see how thick the impact socket is. I went about a half inch high, and took off maybe a 16th all the way around, making it slide by the exhaust manifolds nice, perfect fit.