HELP Need a Part #

[nate_o23]

Hello, I need the part # for the throttle valve (transmission kickdown) cable. The one that goes from the IP to the tranny. The parts stores dont seem to carry it and GM wants a part #. THANKS for any help!

[nate_o23]

Sorry forgot to add that this is for a 85 Sub 2WD with a 6.2L and 700R4 tranny.

[diesel65]

this is a old number, it may have been superceded or discontinued........ 25515599

[JeepSJ]

The cable does not connect directly to the IP. There is a bracket that mounts at the back of the valley, under the intake. The cable attaches to that. There is a rod that connects the cable to the IP.

Napa has them - PN ATP17908
http://www.napaonline.com/masterpages/NOLMaster.aspx?PageId=470&LineCode=ATP&PartNumber=17908&Description=A%2fTrans+Detent+%22Kick-Down%22+Cable

[john8662]

The GM one is preferred, although might start getting a little harder to acquire.

As an alternative, Pioneer does manufacture the correct cable for this application. Although, I do prefer the GM unit for it's accuracy on setting the TV cable length by following the procedure in the book, and actually getting close.

J

[nate_o23]

Thanks guys that is exactly what I was looking for.

John8662- Can you further explain the books procedures for setting the length?? Thanks