RAM IC To GMC FITMENT

[DA BIG ONE]

I've seen one case where a RAM IC was installed in 89 GMC rad support w/rad fitting nicely afterwards. Aside the issue of relocating the oil & trans coolers is this ram IC worth the effort, or?

[Robyn]

If you are going to boost it enough to build serious heat then most certainly look at the idea.
If your boost is in the low to moderate area then probably not worth the effort to do it.

If you are looking at pressures above 10 or so under heavy service it might be a grand idea..

If your power level is in an area that you are happy with and the EGT is in the safe zone I would not spend the time and money to do it.

Just my 2 cents worth

Robyn

[Shikaroka]

I'm make you a good deal on one, if you want to play around with it. ;)