Edge Problem...maybe?

[DADGLW]

when i try to check what # i'm in on my edge using..P-R-N-R-P, IT DOESN'T work..would the problem i'm having with the NSBU switch cause this. got the switch,not the time yet!!. i have the edge EZ. this is on the 02

[Mountainman]

I run the Edge EZ and that routine has never worked for me and I don't have any probs with my neutral sw. I'm kinda' interested in any response you get.
My EZ sw. stays on 2 all the time so I don't really care but I'd be interested why the routine won't work.

[Kennedy]

I haven't kept up with this since the Attitude and switcable EZ came out. I know the older ones did this, but it sounds like the newer modules/programs may have eliminated this...

[DADGLW]

i bought it from kennedy a little over a year ago and it always have worked great! i run it on 2 most of the time but once in a while i play with it on the other setting, so i check it to see where i am, it has always worked with the PRNRP SYSTEM. this morning it worked, tonight it didn't. going to change the NSBU switch tommorrow to see if that makes any difference. when it works, it will go on the limiter, when it don't, it hangs up on about 3 grand.

[DADGLW]

put in new nsbu switch today..fixed everthing!!! all works like it should...