PDA

View Full Version : Green wire engine bay?


sherwin
03-14-2007, 04:16
Anyone know were a female green wire connects to? It Sits(lays) unconnected along the drivers side engine.......I know it goes somewere but have not seen any male conx...
chevss442
03-14-2007, 05:39
Anyone know were a female green wire connects to? It Sits(lays) unconnected along the drivers side engine.......I know it goes somewere but have not seen any male conx...

What year is your truck, do you have a picture?
sherwin
03-14-2007, 06:25
How do I load pictures?
sherwin
03-14-2007, 07:11
Was able to upload pictures on the members photo page .....Thank You for any help

http://www.thedieselpageforums.com/photopost/data/500/medium/DSCN2122.jpg

http://www.thedieselpageforums.com/photopost/data/500/medium/DSCN2123.JPG
piersbc
03-14-2007, 11:19
My glow plug wires are green...you may need to use some spray cleaner to find the male end of the glow plug.
DennisG01
03-15-2007, 10:52
Is that a female "spade" connector? If so, my guess would be a glow wire. I know it's tough in a van, but can you trace it back to where it starts from? Can you see that all of your glow wires are connected and that they all backtrace to the glow plug controller?
JohnC
03-15-2007, 12:26
It would be nice to know what year and model you are dealing with. IIRC, at least one of the cold advance and idle solenoid wires were green on my '93
GSE2SCHMIDT
03-18-2007, 23:51
hey if you edit the picture like "crop" it reduces the size...usually jpeg is the smallest format.
Patrick m.
03-19-2007, 14:43
could be temp sending unit for the guage, does your temp guage work?

The temp sender sits near the front corner of the driver's side head on most.