Exhaust System for sale

[damork]

I'm selling a set of exhaust pipes with muffler, sleeve clamps, etc which are nearly new (used 4 weeks on my Yukon). Muffler is a Donaldson M091047 3.5" with offset in/out pipe. Inlet bolts to factory 4 bolt catalyst flange (replaces catalyst). Muffler length worked for the Yukon with the offset. Tailpipe is the 3.5" Flowmaster kit which comes in 4 sections.

See at
http://community.webshots.com/myphot... curity=YnrAgz (http://community.webshots.com/myphotos?action=viewAllPhotos&albumID=550697594&security=YnrAgz)

Write to 95yukon at excite.com for more details

[The Diesel Kid]

I'm selling a set of exhaust pipes with muffler, sleeve clamps, etc which are nearly new (used 4 weeks on my Yukon). Muffler is a Donaldson M091047 3.5" with offset in/out pipe. Inlet bolts to factory 4 bolt catalyst flange (replaces catalyst). Muffler length worked for the Yukon with the offset. Tailpipe is the 3.5" Flowmaster kit which comes in 4 sections.

See at
http://community.webshots.com/myphot... curity=YnrAgz (http://community.webshots.com/myphotos?action=viewAllPhotos&albumID=550697594&security=YnrAgz)

Write to 95yukon at excite.com for more details


I don't believe it will but will it fit a 1997 Chevy extented cab regular box??

[damork]

The pipe I have with it is more than needed for the Yukon and the muffler was even a bit longer than it needed to be. I can provide measurements, but not sure what obstacles there are ahead of your muffler. From what I've heard the short Tahoe/Yukon is the tightest, so yours might be simpler.

[arveetek]

PM and email sent.

Casey

[damork]

System is sold, thanks for the interest.

[arveetek]

Now I just have to find time to install it!

Thanks David.

Casey