PDA

View Full Version : Crossover pipe....


Warren96
03-10-2007, 15:25
Can anybody make a suggestion where I can get one for my truck?
billschall
03-10-2007, 15:53
www.warpspeedperformance.com $59.99 + shipping
redbird2
03-10-2007, 17:45
heath makes a nice mandral bent several of the supports of this site also sell good quality try any of them they won't lead you wrong
Slim shady
03-11-2007, 18:14
Thanks Billschall for the link on the cross over pipe. I will be contacting them this week.
RT
03-17-2007, 20:42
For what its worth I got a Warpspeed crossover and it was 2" too short. My muffler shop had to add in a short section to make it work. RT
Warren96
03-18-2007, 07:27
You cannot believe all the places that I called looking for this crossover pipe! Found it in a place called "M+S Technical Services '' in West Babylon ,NY.
billschall
03-18-2007, 09:55
For what its worth I got a Warpspeed crossover and it was 2" too short. My muffler shop had to add in a short section to make it work. RT

Mine fit perfectly.
Mark Rinker
03-18-2007, 12:48
I took one (that was purchased online) into my local shop for installation and had new seals done at the exhaust manifolds at the same time. The shop owner laughed and said - "I could have bent this up for you in about 5 minutes for an extra $30."

Just a thought.
billschall
03-18-2007, 17:23
I took one (that was purchased online) into my local shop for installation and had new seals done at the exhaust manifolds at the same time. The shop owner laughed and said - "I could have bent this up for you in about 5 minutes for an extra $30."

Just a thought.

A 2-1/4", mandrel bent crossover with flanges welded on (at the correct angle) for $30? Bargain du jour!