xtrempickup
01-14-2007, 18:10
I just replaced my primary pump and found that my vacuum pump wasnt hookled up to my turbo actuator any longer. So i changed the pump, hooked the line back up and i only pull like 1-5lbs of boost, 5 lbs being at max under a full load like uphill on a highway at 70 mph. Could my Vacuum pump be not strong enough to hold the wastegate actuator closed so i can run normal boost. Eveything is stock and i'm blowing a load of black smoke under any type of load. MPG isnt bad similar to what i nornally got so i dont know what to say. I thought the wastegate actuator was weak, but after I found the vac pump line off i figured maybe it was just that. I still have a known good actuator to work with but I think its the Vac pump possibly. anybody have any suggestions