WTB: 6.5L Turbo Wastegate actuator

[xtrempickup]

My 95's wasteagate actuator is Shot, has no pressure at all on it, the diaphragm inside ruptured i'm guessing. Does anybody have a known good stock actuator lying around from something they changed over or replaced. I have cash, Please help me out. Turbo is stock Borg Warner turbo

[beast]

if you can wait a few days i will send you my old one. i also removed the vacuume pump if you need that. i went to a manual waste gate on mine.

[xtrempickup]

Yes i can wait a few days, I dont need the vacuum pump. I dont know if there is any difference in the years, mine is a 95, a picture would clear it up if you can't tell me if its the same

[beast]

i dont think there is any difference but if it dosent work just keep it. im not worried about it.

[xtrempickup]

ok cool, let me know when you have it ready to go

[beast]

pm me your address and i will see what i can do. i am busy but will get it done.

[Kennedy]

Pre '96 had horizontal actuator rod. 96 and later had vertical rod. They will not interchange.

[beast]

this one has a horizontal rod so it should work, will try to get it out tomorrow by usp. if it doesnt i would recommend the manual boost from kennedy. i love mine and it also let me do away with th egr and vacuume pump!

[xtrempickup]

yes mine is horizontal, thanks again

[beast]

left it at the post office at 2 this afternoon. i sent it prioraty and they said 2 or 3 days. so you should have it around the middle of the week. hope it helps.

[xtrempickup]

thanks a lot

[xtrempickup]

got it today, thank you very much, its the same as mine so now I just gotta change it. I also found out I have other stuff to change on my truck that is ready for it.