vr1967
10-07-2006, 01:23
Working on a friends 95 3500 HD. Had a 6.5 (new motor less than 5K miles) that won't run. Problem to me seems to be a sensor, as it is not giving fuel to the injectors. He also brought me a 93 Cummins he wants me to put in it's place. My question is, he pulled the 6.5, the brought me the truck. There are 2 harnesses, one out the driver's side firewall, the other on the pass side, with a few wires connecting the 2. The one on the pass side, is this the one for the IP computer? Can I eliminate it. (I am trying to get a wiring diagram, but no luck yet.)
Second, I can get the 6.5 as a freeby. Aother friend has a 93 6.5 with mechanical pump, will it work to eliminate the electronic IP? (I asked the one with the truck if he wanted to do this, but he said NO. 3rd 6.5 in 120K miles) I thought of doing this (if possible) and using the 6.5 in my work truck. I saw post about using the old 6.2 IPs, but wanted to make sure.
Any input, advice would be appreciated.
Thanks
Virgil
Second, I can get the 6.5 as a freeby. Aother friend has a 93 6.5 with mechanical pump, will it work to eliminate the electronic IP? (I asked the one with the truck if he wanted to do this, but he said NO. 3rd 6.5 in 120K miles) I thought of doing this (if possible) and using the 6.5 in my work truck. I saw post about using the old 6.2 IPs, but wanted to make sure.
Any input, advice would be appreciated.
Thanks
Virgil