Return line routing w/ dual thermostat

[johnanc]

I'm installing dual thermostat crossover mod on '94 K2500, return lines interfering with positioning of dual thermostat housing. Any suggestions, or pic's, of how to reposition the return lines.

[Bnave95]

It is tight.If you reconnect the line just make sure it is not pinched. I move the hard line around some and was fine. A longer hose would give more arc.

[johnanc]

Thanks, it seemed there was no way other then manipulating the hard lines.

[john8662]

Takes a 'lil tweaking in the form of some careful bends, it'll work tho.