Is this the right intake?

[bmiszuk]

I found this intake for my engine but I'm having a hard time determining exactly what it is and if it's right for my truck (see sig). Can anyone help ID this intake for me? I'm running a C code intake now and have been hoping to upgrade to a non-EGR manifold.

http://www.thedieselpageforums.com/photopost/data/515/medium/for_sale_006.jpg
http://www.thedieselpageforums.com/photopost/data/515/medium/for_sale_005.jpg

[diesel65]

That is the 1st generation J intake manifold with the divided plenum, this will work just fine.
Need to be careful with a Hummer intake manifold, the air filter studs are 90 degrees off.

[john8662]

If your fuel filter is mounted to the back of your existing manifold, then this one isn't a direct swap-in. You'll need to drill and tap provisions to mount your secondary fuel filter on the back, that's all...

[bmiszuk]

My fuel filter was replaced by the previous owner with an aftermarket one, so I don't use the intake-mounted filter assembly.

Thanks for the replies, I'll go ahead and get the intake.