Brake S/W R&R

[Bnave95]

Have not done this,no brake light. Cruse control not working. Bulbs fine,E lights flash. Still flash when brake is applied. Tq converter woun't lock out when brake is applied with foot on go pedel.
So figured need new switch.
Step one,remove with hammer?:D

[Robyn]

There is a combination switch on the brake pedal assembly that runs all these things. Give it a look see. Be sure its adjusted right too.

[Bnave95]

After I posted,readed up a little and went to garage. Touched brake and seen lights. For what ever reason the brake lights work and cruse.:confused:

[tommac95]

Bnave-
I had intermittent cruise , then another driver advised me i had 'no brake lights on that thing'. I read a little, just replaced switch on brake pedal ... no change, still no brake lights.(??)