Rear Axle Noise

[vetman]

Got a noise from the rear-end that sounds like a carrier/side bearing. I'd like to change it myself, but have no experience setting the gear lash / pinion depth and do not have the equipment. Can anyone recommend the best place to get the parts and test equipment, as well as a "how-to" tutorial so I get it right?

[DmaxMaverick]

If all you do is replace bearings, there is no setup. Replace and retorque. The setup won't change unless you get defective parts. Measure before and after to confirm a solid replacement. Rearend service procedures can be found in the GM service manual ( www.helminc.com ), and online at www.alldatadiy.com .