I may be in the wrong forum for this, if so please move to correct forum. I have to replace the hydro boost on my 96 2500. How the devil do you get the pin out of the brake rod. Unbolting the booster is not a problem, but can not figure out the pin in the brake rod to pedal. HELP!
Hello
The pin is part of the pedal assembly.
You remove the one bolt and the little retainer and some times a clip and the rod slides off the side of the pin toward the passenger side of the rig.
Its tight up under there for sure. I have done several of these and they can be obnoxious for sure.
Robyn
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.