kenisret
06-14-2006, 12:14
Is there any member that is running one of Peninsulars 250 hp turbo's.If so is that a direct bolt on to the stock man.I guess the 300 hp turbo only works with the 18:1 pistons. The reason I ask is that I recently installed a generec inter-cooler mounted in fnt of rad with 3 in ducting at least at least 6 ft of tubing total and that is alot of volume of air. Anyway afterwards I could only make 7.5 psi boost so I took it off.Maybe I should have played more with the boost master.Anyway it was a nice installation with the aluminun tubing.The grille would have had to be cut to fit but I didn't do that until I saw how it would work. I guess if I went with a bigger turbo that would take care of the volume problem.It will be easy to put it all back on since everything is allready fit.It is really a nice polished aluminun intercooler 28x18x4.I only had about 300$ in the whole setup. Any thoughts would be welcomed.