farmboy1989
05-12-2006, 18:56
I have a new set of injectors that were installed but accidently broke off one of the fuel return posts.Can these be replaced? I also thought about moving it to the back cylinder and putting a screw there where the post was or plugging it with something else.
The little nipples are brazed or silver-soldered in place.
A diesel injection service place would probably have a spare top half of the injector housing they'd install for you at a nominal price. The crack pressure would have to be re-checked after swapping out the part.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.