Exhaust is done!

[JeepSJ]

Here are some pics...

http://www.newsolutionsnw.com/pics/exh1.jpg
http://www.newsolutionsnw.com/pics/exh2.jpg
http://www.newsolutionsnw.com/pics/exh3.jpg
http://www.newsolutionsnw.com/pics/exh4.jpg
http://www.newsolutionsnw.com/pics/exh5.jpg
http://www.newsolutionsnw.com/pics/exh6.jpg
http://www.newsolutionsnw.com/pics/exh7.jpg

Pipe is 3.5" from the turbo outlet all the way back. Muffler is actually a 4" Magnaflow.

If you need exhaust or roll cage work done in the Seattle area, here is his contact information -
Doug Chase
www.chaserace.com (http://www.chaserace.com)
Custom roll cage and exhaust fabrication
425-269-5636

We're getting closer!

Mark

[Whitpirate]

Looks great! I've got a 1995 C3500 Dually flatbed extended cab that I'd like to do the exhaust on. What sort of $$ did this place charge? Did they fab it all or did you buy a kit for install?

[JeepSJ]

He did it all custom. There wasn't any kit that was even close to what I needed. The pipe is all 14ga. The crossover is 2 1/2". It set me back about $750. I have seen people pay that for an off-the-shelf system.

[Keith Richards]

very cool ride

[G. Gearloose]

good show, keep us posted..

[markrinker]

Interesting. Did you upgrade the Jeep's suspension for the added weight of the 6.5, or is it up to par already?

[JeepSJ]

Waggys all have a problem with the stock rear springs sagging, so it sits level with the diesel. It will be getting a 4" lift in the near future.

[Barry Nave]

JeepSJ
I've been tracking your post way back when you started this ideal. Looking good and EX system should last. Ever thought about coating the system for a lift time of use?
Test drive getting close?
What Mods have you done to the ENG?
By the looks of the front it's been treated :D

[JeepSJ]

My uncle works for a metal plating company - we have been talking about ceramic coating the whole thing.

As for engine mods - timing gears, main cap girdle and studs, ARP head studs, match port intake and heads. Then there's the MHI turbo...