Spindrift
08-25-2004, 17:08
I finally had a chance to weigh my rig prior to our last trip out. I was surprised to learn that my tongue weight was approx. 9% of trailer weight, even after I had front loaded what I thought to be more than enough cargo. Is there anything I can do, other than placing lead bars in my front storage compartment, that will increase my tongue weight?
The dealer where I purchased my Reese Dual Cam HP said that tongue weight could be as low as 7% of the trailer weight. I'm finding that my current 9% isn't adequate and I would like to be more towards the top end of the 10 - 13% range. I would like the trailer to track a little better than what I currently experience, which isn't bad at all considering I know that technically, a 34' trailer is a little long for my Burb's wheelbase.
I believe what's contributing most to the challenge of increasing tongue weight is the style of the TT. The Cougar has a rear bedroom slide-out which, more than likely, is placing a disproportionate amount of weight on the rear of the TT. In Keystone's infinite wisdom, all three tanks are located between the TT axles and the end of the TT so loading up with fresh water is out of the question.
I weighed my rig on a 3 platform CAT scale. These are the numbers:
TV and TT
Steer Axle 3,860 lb.
Drive Axle 5,340 lb.
Trailer Axle 8,660 lb.
GROSS WEIGHT 17,860 lb.
TV
Steer Axle 3,920 lb.
Drive Axle 4,420 lb.
Trailer Axle 00 lb.
GROSS WEIGHT 8,340 lb.
17,860 (TV and TT) minus 8,340 (TV) equals 9,520 lb.
5,340 (TV/TT Drive axle) minus 4,420(TV Drive Axle) equals 920 lb.
920 lb. divided by 9,520 lb. equals 9.7%
I like to round down.
Based upon these numbers, is 920 lb. the "true" tongue weight?
[ 08-25-2004, 05:41 PM: Message edited by: Spindrift ]
The dealer where I purchased my Reese Dual Cam HP said that tongue weight could be as low as 7% of the trailer weight. I'm finding that my current 9% isn't adequate and I would like to be more towards the top end of the 10 - 13% range. I would like the trailer to track a little better than what I currently experience, which isn't bad at all considering I know that technically, a 34' trailer is a little long for my Burb's wheelbase.
I believe what's contributing most to the challenge of increasing tongue weight is the style of the TT. The Cougar has a rear bedroom slide-out which, more than likely, is placing a disproportionate amount of weight on the rear of the TT. In Keystone's infinite wisdom, all three tanks are located between the TT axles and the end of the TT so loading up with fresh water is out of the question.
I weighed my rig on a 3 platform CAT scale. These are the numbers:
TV and TT
Steer Axle 3,860 lb.
Drive Axle 5,340 lb.
Trailer Axle 8,660 lb.
GROSS WEIGHT 17,860 lb.
TV
Steer Axle 3,920 lb.
Drive Axle 4,420 lb.
Trailer Axle 00 lb.
GROSS WEIGHT 8,340 lb.
17,860 (TV and TT) minus 8,340 (TV) equals 9,520 lb.
5,340 (TV/TT Drive axle) minus 4,420(TV Drive Axle) equals 920 lb.
920 lb. divided by 9,520 lb. equals 9.7%
I like to round down.
Based upon these numbers, is 920 lb. the "true" tongue weight?
[ 08-25-2004, 05:41 PM: Message edited by: Spindrift ]