Dual Thermostat installation

[williedog]

I am installing the High Capacity cooling modification on my 93 6.5 TD. While trying to install the dual thermostat housing, the fuel return line is in the way of the housing modification. How do I handle this problem??

[bobt]

I was told you could bend it to get it to fit, but I never could. Instead, I cut mine into three pieces and used flexible fuel line and clamps to work around the thermostat housing, etc.
Bob

[cruzer]

I did some major bending, but was able to get it run w/out cutting. You need to be creative. I had to snake it around in a way that was very different than original. Think outside the box.