PDA

View Full Version : No 4WD



Mark Pearce
06-27-2005, 07:55
I'm getting a little fed up with my 02 Duramax.
Wheel studs busted.
Rear axle seals replaced.
Injectors went out.
Then the glow plugs.
Now it won't go into 4WD. A little embarassing sitting on the boat ramp this weekend with the tires spinning.
Anyone know of this problem before I go to mt second home at the dealers tomorrow.

More Power
06-27-2005, 10:54
If you have the pushbutton transfer case (NP1), you might want to take a look at the switch panel (http://www.thedieselpage.com/members/duramax/service4wd.htm) as a possible problem.

MP

madmatt
06-27-2005, 16:01
Hey MP, did that switch fix yours?

DmaxMaverick
06-27-2005, 17:31
A new switch fixed mine when it was only a couple months old. No problem since.

More Power
06-27-2005, 20:28
Yup, a new switch did the trick. I was a little surprised when I picked it up at the parts counter. They stocked these switches, and I was told they move quite a few of them....

MP

madmatt
06-28-2005, 19:03
I'd bet we sell 3 dozen a year. most in the winter :eek: