PDA

View Full Version : grille removal



cmtndmax
07-16-2003, 21:20
Any one know how to remove the clips that hold the outer arms of the grille? Every thing but these comes off easy. I'm missing something

Idle_Chatter
07-16-2003, 21:50
On my 2001, once I'd pulled the push-pins and removed the upper black plastic shroud and took out the one bolt that is on the center brace it just pulled straight forward and off. The outer clips are spring steel and push into square holes in the fender braces. Just get ahold of the cross bar and give a good tug forward, they should pop right out and will snap right back in.

cmtndmax
07-17-2003, 13:11
Thanks Idle_Chatter I was not pulling hard enough. I was being careful didn't want to break something.

battmain
07-18-2003, 17:04
You can also use a small screwdriver to help the clips out of the hole.