315/75R16 on 16x10 for 2002 D/A CC

[Little_Wiley]

Anyone running 315/75R16's on 16x10 Rims on a D/A CC? Was wondering what kind of rubbing problems you may have had and what you did to completely get rid of the rubbing problems.

Tks
Carlie

[Silver Bullet]

Wiley,
I am runnin' 285's on 16x8 and I think it would be next to impossible to run 315's without a small lift...body or suspension. I know a few guys are running 295's on 16x8 rims.

I see you have a 6" lift...DMAXDiva is runnin' 37's on 16x8 (soon to be 16x10 I think) with no problems. Check out her setup: http://www.picturetrail.com/dmaxdiva (mine would be short silver one next to hers!)

[Toddster]

Read my sig....They rub a little but they look WAY kool ! I believe 315's are actually a 70 series, 285's are 75, witch will make both tires very near the same hieght. The 315's will be much wider, witch give then the "Kool factor" advantage ! :cool:

[Dmax son]

The 315 are 35 inchs tall and 12.50 wide. I would like to see if they would fit too.

Bryan

[Jelisfc]

I believe 12.50-16.5 equate to a 305/70/16.

[PBR]

i have 2wd hd and i am running 315's on 16x8's with a spindle lift and it works out great... my buddy has a 4wd with 315's on the stock wheels and the wheels are a little to narrow, he has the "leveling kit" on his(new torsion bar fingers). the 16x10 wheels will probably stick the front tires way to far out of the fenders, i would go witht he 8's. good luck.

[Toddster]

Jelisfc, you are correct, my mistake....