mdrag or mavrick

[bearman]

Hi,
This is Bear's wife. He's working and needs some help.
He needs the part numbers for the Centramatic balancers front and rear, for the 19.5 conversion. According to Jerry at Centamatic, the 10 on 285 mm bolt pattern is wrong.
Part numbers or specs would be greatly appreciated.
Thanks,
Sherry

[mdrag]

Hello Mrs. Bearman,

The Alcoa wheels for my 19.5" conversion (using the Arrowcraft adapters) are 10 bolt on a 285.75 mm bolt pattern...most leave off the 0.75mm in the description though...

Even after I explained VERY CAREFULLY what I was doing/what I needed AND sent pictures of the wheels and adapters to Centramatic - they sent me a 19.5" with an 8 bolt pattern - which they corrected promptly...I had the correct balancers the next day.

The Centramatic balancers that I used are:

600610 front
600620 rear

You may want to have them check the multiple pics of the wheels/adapters at the BIG WHEELS link in my sig.

As long as the 8 bolt to 10 bolt adapters are still the same (mine were delivered from Arrowcraft on 07/16/02), these part numbers should be the correct ones. Good luck.

[ 12-15-2002: Message edited by: mdrag ]</p>

[bearman]

Thanks mdrag,
I will pass this on to Bear.
Sherry

[Maverick]

Hello Mrs. Bearman,

My invoice from Centramatic:

Invoice #: 0045075-IN
Date: 11-22-02
Customer #: XSWIS
Salesperson: 0780
Item #: 600610 (19.5" 10 bolt front)
Unit: Set

Don't have rear balancers.