PDA

View Full Version : TRUSPEED SPEED SIGNAL CALIBRATOR



bbugg
04-25-2002, 18:14
Okay guys,
Comments welcome:

SUPERLIFT ANNOUNCES THE RELEASE OF THE REVOLUTIONARY TRUSPEED SPEED SIGNAL CALIBRATOR
WEST MONROE, LA - A speed sensor calibrator has finally arrived that addresses the needs of any computer-controlled vehicle running larger (or smaller) diameter tires: The Superlift TruSpeed speed sensor calibrator. The TruSpeed works with any electronic speedometer and hooks up in line with the speed sensor located on the transmission or transfer case of the vehicle. The TruSpeed alters the speed signal at its source, so speedometer reading, ABS function, and transmission shift points are all corrected to work with any non-stock tire diameter. A simple four-wire hookup is all it takes to install the TruSpeed, and comprehensive installation instructions make calibration an easy one-man operation. It not only corrects the speedometer reading to within 1 percent, it can be recalibrated an infinite number of times if future gear ratio and / or tire changes are made to the vehicle. In addition, the TruSpeed can be programmed for two different height settings for those who make seasonal tire changes or those who frequently run two different-height sets of tires on the vehicle (i.e. "street" and "show" tires). The TruSpeed will soon be available for all domestic and import cars, trucks, and vans equipped with an electronic speedometer. For more information, contact your nearest Superlift dealer or call the company's sales / tech line at 800/551-495
smile.gif

Derek M
04-25-2002, 18:33
Good info, one thing though...... How much $$$$ ???? smile.gif

bbugg
04-25-2002, 18:51
Here's the complete phone number:
800/551-4955

I'll call tomorrow and get more details.

Jake99Z71
04-26-2002, 02:35
bbugg,
Check out this post for more details http://forum.62-65-dieselpage.com/ubb/ultimatebb.php?ubb=get_topic&f=3&t=002991 this should help you out. It appears that early 2001 trucks have slightly different wiring.