View Full Version : has anyone ordered a fastcooler
needbigtruck
03-30-2004, 06:07
Has anyone installed one of those fastcoolers (www.fastcoolers.com) on thier ZF6 manual transmission? If so did you install 2? and which part number off the website did you order?
needbigtruck
04-29-2004, 17:27
Thought I'd bring this back up front for another attempt at an answer. Come on someone out there has bought one of these. Thanks
Michigana_Joe
05-04-2004, 04:06
Anyone?
DmaxMaverick
05-04-2004, 12:48
......Apparently not
Looks like a functional product, though. A little pricey.
When I was running my Dodge/Cummins 6-speed some of the guys on the TDR site were running them. If memory is clear enough they said they lowered the tranny temp somewhere around 50 - 75 degrees.
wonder if one would work on the Allison to help lower towing temps?
Chris N5CWM
05-19-2004, 06:38
I'm not aware of any GM pickups with FastCoolers, but I have two installed on my NV4500. There isn't much lubricant in the NV4500, so any increase is very desirable! Generally automatic transmissions have an external oil cooler but not a manual transmission.
FastCoolers almost double the lubricant capacity, and expose more surface area to keep the lubricant temperatures down. Also if you are so inclined, there is a threaded hole for a temperature probe. They are installed where the PTO covers are so long as you have room. Sometimes an exhaust pipe, front axle driveshaft, etc may be in the way. I've even seen them installed on the 241HD transfer case or any transfer case or transmission that has the standard 6 bolt PTO cover.
Dan Herr
05-19-2004, 15:14
I just ordered one last week - have not received it yet. Below is a series of emails I exchanged with Verlyn Fast.
The bolt pattern is the same on all six bolt pto covers. The part #
1fc375 is for one cooler for transmissions with only one pto cover. The
2fc375 is for two coolers for transmissions with two pto covers. The 375
in the part number represents the length of the cooler meaning it is
3.75 inches in length.
I have just left out the GMCs, I'll have to fix that.
Feel free to call 1-800-262-0122
Fast Coolers
Verlyn Fast
-----Original Message-----
From: Daniel Herr [mailto:danherr@earthlink.net]
Sent: Thursday, December 25, 2003 5:40 PM
To: Verlyn & Lisa Fast
Subject: Re: trans cooler
On your web site this is listed only as a Ford part.
It works for GMC also??
dan
Verlyn & Lisa Fast wrote:
>Yes, I have one specifically for the Z-F 6 speed. The part# is 1fc375
>and its cost is $111.00. Thanks
>
>Fast Coolers
>
>Verlyn
>
>-----Original Message-----
>From: Daniel Herr [mailto:danherr@earthlink.net]
>Sent: Wednesday, December 24, 2003 2:48 PM
>To: faststamps@sio.midco.net
>Subject: trans cooler
>
>Is your unit compatible with the ZF 6 speed manual on a K2500HD
Duramax?
>
>Thanks,
>
>dan herr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.