18" s or 20" s

[DATSBAD]

i currently have hummer hs wheels and tires on the truck . i want to go to a 18" or 20" wheel and tires set up . does anyone have any info on this ?

this is what i know . the bfg 315/70/17 have a diameter of 34.5 and a width of 12.8

now the nitto in a 18" 34.88 and width of 12.99
and the 20" nitto 35.12 and width 12.93

anyone think i will have any troubles fitting these on the truck . i have my bars cranked and nothing rubs . also have my front bumper spaced out 1" . any help . it is about $1,000 difference between the 20" and 18" thanks

[JrTuner]

I have 315/60R18 Nittos on Weld Evo Velociti 8's. My truck is probably lower in the front then stock. I had to trim the bottom of the inner fenderwells in the front and nip the corners of the lower air damn and that is it. They will still rub a little if you turn lock to lock but you aren't suppose to do that, not good for the power steering pump. If your truck is raised any you will probably have less interfernce problems. My the way I am looking to sell my wheels, tires, lugnuts, balanced ready to go. About 4000 miles on them mostly highway(drove to FL twice last summer). Not on the truck now took them off for the winter.

[Craig M]

How about the 19.5's. Alcoa makes nice wheels for the 19.5 and heavy duty tires are also available for the 19.5 (not so for most low profile 20's). Guy had the 19.5's on his Duramax dually and it really set if off nice. the 16" wheels and tires on the dually look really punny.

[DATSBAD]

Jr tuner , will you email me pics of your wheels and tires for sale ? email me at jasmhuber@earthlink.net

[JrTuner]

You have mail.

[BIGSTICK]

JrTurner can you e-mail me those pics if the wheels and tires are still available to randyt@cinci.rr.com Thanks