Palssonater
11-21-2005, 14:36
Hi guys. I am the new guy around here. Thought I would make my first post worthwhile.
I just moved WAY up North for work purposes and have recently bought a 2002 GMC Sierra 2500HD Duramax.
Before I left for the 900 mile journey, I did all my fluid and filter maintenance on my truck. I ran into a problem with the fuel filter. I replaced the filter and used the existing float sensor for "Water In Fuel".
After starting the truck "Water in Fuel" indication light came on the message center. I have drained the filter many times with little or no success as far as fluid goes in there. I am on my 3rd tank of fuel and it is still present.
Is the float just stuck? Should I take it off and re-install the sensor? Or is there a code that needs to be reset?
Thanks for any help that may be offered.
I just moved WAY up North for work purposes and have recently bought a 2002 GMC Sierra 2500HD Duramax.
Before I left for the 900 mile journey, I did all my fluid and filter maintenance on my truck. I ran into a problem with the fuel filter. I replaced the filter and used the existing float sensor for "Water In Fuel".
After starting the truck "Water in Fuel" indication light came on the message center. I have drained the filter many times with little or no success as far as fluid goes in there. I am on my 3rd tank of fuel and it is still present.
Is the float just stuck? Should I take it off and re-install the sensor? Or is there a code that needs to be reset?
Thanks for any help that may be offered.