Pyro Troubleshoot

[LanceW]

Just installed an Isspro EGT gauge, model 3607TR, and am getting no readings from it. Have rechecked all connections and the power and ground, still no luck.

If anyone has any troubleshooting tips or procedures I could try, I'd sure appreciate it.

Thanks,

Lance

[rjschoolcraft]

If you have a digital voltmeter that can read on the millivolt scale, you can test the thermocouple with a torch. Gently apply heat to the tip and observe the readings on the volt meter. If you get no or very sluggish response, the thermocouple is bad.