conradv
05-07-2003, 12:16
The dealer repaired my truck for the Service 4WD problem - it was the TSB that TxDoc mentioned in a previous post (#03-04-21-001A, Apr 17, 2003) yesterday.
The TSB reads:
"4WD Light, 4WD Inoperative, DTCs C0327, P0836, P0500 (Replace Encoder Motor Sensor, Reprogram TCCM, Inspect Front Drive Axle Engagement Sleever for Damage/Repair If Necessary)" It's an 8 page TSB.
Dealer said that my Sleever is not damaged, so hopefully nothing else was affected.
He said that the new Sensor has improved sending contacts, different from the old one that sent erratic signals to the computer.
Time will tell if it worked...
The TSB reads:
"4WD Light, 4WD Inoperative, DTCs C0327, P0836, P0500 (Replace Encoder Motor Sensor, Reprogram TCCM, Inspect Front Drive Axle Engagement Sleever for Damage/Repair If Necessary)" It's an 8 page TSB.
Dealer said that my Sleever is not damaged, so hopefully nothing else was affected.
He said that the new Sensor has improved sending contacts, different from the old one that sent erratic signals to the computer.
Time will tell if it worked...