Minimum Thickness Spacer for a 3500

[trailhorserider]

Based on a recent thread it appears that Michelin 235's will work on a 3500 with as little as a 1/2" spacer on the rear studs since I'm not willing to run with 1/8" or less when fully loaded. Does anyone know of a source for a relatively thin 1/2" spacer? I'll have to look at the studs to see if they can be used as is or if I'll require longer ones.

Rick T

[bbattrell]

1/2" should do it, but our hub centered rim's wont work with spacer's. Thats why I have been looking at new wheel's.
If Alcoa dosn't come out with some wheel's in the next couple of week's. I will have some new Michellin Traction 16/85E for sale, and I am going with 19.5"