Allison Emblem Installed

[Steve Cornell]

Here's a picture of the Allison emblem, I decided to install it here, I saw this emblem at my Allison dealer when I picked up the Transynd and the deep pan and tried my best to talk him out of it but couldn't do it and he said he couldn't order one.

P.S. you can also see my 3500 running lights installed under the tailgate http://www.62-65-dieselpage.com/ubb/smile.gif

http://www.rtol.net/scornell/alilogo.jpg

------------------
Steve Cornell
2001 Silverado 2500HD CC 8.1 \ Allison
96 Impala SS
2002 Haulmark 36' Gooseneck Car Hauler with Living Quarters
scornell@rtol.net
My Impala SS \ Car Audio web site (http://www.rtol.net/scornell/)
My 2500HD web site (http://www.rtol.net/scornell/silverado.htm)

[APR2000]

If you couldn't talk the dealer out of it and he couldn't order it, then that just leaves one possibility. You stole it. http://www.62-65-dieselpage.com/ubb/wink.gif Looks good.

------------------
2001 Chevy 2500HD 4x4 D/A LS Regular Cab Una-Goose Hitch, Line-X, Westin CP/SS Nerf Bars, Lucerix Mirrors. Took delivery 12/8/00. Virginia DURAMAX plates.

[Steve Cornell]

http://www.62-65-dieselpage.com/ubb/smile.gif If they weren't watching me so close I would have tried to steal it http://www.62-65-dieselpage.com/ubb/smile.gif

I ordered them from the Service Graphics, Inc. (317-471-8246). The P/N is F20.

http://www.rtol.net/scornell/alilogo2.jpg

------------------
Steve Cornell
2001 Silverado 2500HD CC 8.1 \ Allison
96 Impala SS
2002 Haulmark 36' Gooseneck Car Hauler with Living Quarters
scornell@rtol.net
My Impala SS \ Car Audio web site (http://www.rtol.net/scornell/)
My 2500HD web site (http://www.rtol.net/scornell/silverado.htm)

[56Nomad]

Hi Steve,

I've got mine on order. I plan on putting
mine *above* the Chevrolet emblem. The Duramax
emblem will be above the Silverado emblem.

Of course it is a personal preference matter,
but I think I want these glued on emblems on the flat
part of the tail gate.

Also, is the background of the Allison emblem
black or dark blue?

Thanks for sharing......



------------------
2002 Chevy 3500HD, ExtCab Duramax/Allison 4x4, White/Graphite

http://www.picturetrail.com/56nomad1

[Steve Cornell]

I had the emblem temporaly stuck all over the truck including above the Chevrolet and Silverado emblems but finally decided on this location, the Allison emblem actually is on the "flat" part (just fits) but it is at a bit of a angle.

The background is black.

[DSLPOWR]

Okay, that answers my question. http://www.62-65-dieselpage.com/ubb/biggrin.gif

------------------
2002 3500 Duramax/ZF6 speed/4x4/LS Interior/Summit white

2001 2500HD/Alli-Max/4x4/LT Interior/Extended cab/short box/Onyx Black/Graphite leather/295 BFG's/Eagle Alloys/MX7000 lightbar/Lund Deflector/DeeZee Gold series Toolbox/DeeZee Aluminum Tread Mud Guards/DeeZee Aluminum Tread Bed rail protectors/BOSS 9'snowplow/Straight piped/EGT and Boost guage (Pillar mount)
"Diesel Fumes Make Me Horney"

1994 Chevrolet 2500/Silverado/4x4/Blown-injected 454/9" Lift/35X12.50 BFG's/15X10 American Racings

http://www.picturetrail.com/gallery/view?username=dslpowr

[MABurns]

Has anybody removed the factory stickers off of the tailgate(the SILVERADO and CHEVROLET)? Are they on there with only 3M tape or are there holes too?

[hoot]

They don't use holes anymore. It's sticky tape, 3M style. Best to put some heat on it like with a hair dryer or a 500W worklight before pulling it off. Be careful. Some people have actually left distorted sheet metal when pulling hard.

------------------
Mike DP Member #2429
2001 2500HD GMC Duramax/Allison Summit White CC/SB Loaded
Amsoil Air Filter, Straight Piped PIC (http://uscom.com/~hoot/cars/duramax/gmc/exhaust/jvn03.jpg)
PS2K Propane, 22 Gal. LP Tank PIC (http://onramp.uscom.com/~hoot/cars/duramax/gmc/propane/bigtank1.jpg)
Allison Deep Pan, Transynd Syn ATF PIC (http://onramp.uscom.com/~hoot/cars/duramax/gmc/allison/)
SPA DG-111 Boost/EGT PIC (http://onramp.uscom.com/~hoot/cars/duramax/gmc/egt/), Nordskog Fuel Level, High Idle Switch PIC (http://onramp.uscom.com/~hoot/cars/duramax/gmc/gauges/pillar_w_idle.jpg)
VentShades, Husky Mudflaps, 255/85-R16 Dunlop Radial Rover RV's PIC (http://onramp.uscom.com/~hoot/cars/duramax/gmc/gmc2.jpg)
Mag-Hytek Rear Dif Cover PIC (http://www.wjsperformance.com/mag-hytec/differential_covers.htm)
Kennedy Headlight Booster Kit ALL TRUCK PICTURES CLICK HERE (http://onramp.uscom.com/~hoot/cars/duramax/gmc)
1994 K1500 Blazer 350 Loaded, Flowmaster duals

[4x4man]

Got my emblems in yesterday afternoon and decided to put them above the 2500HD emblems on the doors...looks pretty good.

http://www.picturetrail.com/gallery/view?p=999&gid=281048&uid=150071

Bob

------------------
2001 2500HD 4x4 EC LT 8.1L/Allison 1000 Series, 4.10 gears with Eaton Locker

Current additions:
Line-X Bedliner
3M Clear Bra
Westin CPS Nerf Bars

My Truck (http://www.picturetrail.com/4x4man)

[56Nomad]

Got my emblem today and put it on the
gate *above* the Chevrolet emblem. Picture
at:
http://www.picturetrail.com/gallery/view?p=999&gid=644981&uid=469559&members=1

------------------
2002 Chevy 3500HD, ExtCab Duramax/Allison 4x4, White/Graphite

http://www.picturetrail.com/56nomad1

[Alli-max]

d@mn, looks like I need to jump on the bandwagon as well.... http://forum.62-65-dieselpage.com/ubb/biggrin.gif http://forum.62-65-dieselpage.com/ubb/biggrin.gif

------------------
2001 GMC 2500HD SLE AlliMax, Longbed, Ext. Cab, 4X4 Summit White, G80 Differential, Husky Liners, Black UWS Toolbox, Black Westin Nerfs, Black Replacement Front and Rear Bumper, JL Audio, Hella, Cobra, Goodyear 265/75/16's, Tekonsha Prodigy Controller, Fumoto, Rhino Liner, 400 Watt Inverter, XM Radio
KENNEDY 4" Exhaust: INSTALLED!
UPDATED PHOTOS (http://www.picturetrail.com/markstanco)

My truck is faster than Pullinpower's. Period.

SoMnDmax...here I come!

I sure wished I lived in Lawton, OK so I could work on my truck in Mdrag's Shop!

[hogbreth]

I purchased 4 stickers for me and a friend. I was planning to to put them on thr side with the Duramax badge but it looked to crowded. I wound up putting one Allison Trans badge in line and above the SIERRA on tailgate. Looks good.

[pullinpower]

Well I just ordered me an Allison badge for the tailgate also. Seems as if Allison would want their name on the truck somewhere.

[hoot]

I have three extras.
They charge $5 handling and $6 shipping.. $11
Then I think it was $3 and something each. Total came to $29.

One through them will cost you about $15
Send me $8.00 I'll send you one. On sale, two for $16.
Cheaper than ordering and paying shipping.


hoot@uscom.com

[pullinpower]

I'll takem hoot,email me at ehaney@midsouth.rr.com :D

[ 02-26-2002: Message edited by: pullinpower ]</p>

[bearman]

Hoot
Care to make a donation to the poor :D :D :D ;)

[hoot]

Sorry guys..... all gone

Somebody else order a bunch and do the same.

http://www.uscom.com/~hoot/cars/duramax/gmc/emblems/newallison.jpg
http://www.uscom.com/~hoot/cars/duramax/gmc/emblems/nighttailgate.jpg
http://www.uscom.com/~hoot/cars/duramax/gmc/emblems/tailgate.jpg

[Maverick]

Hoot,

Did you order from Service Graphics, Inc. (317-471-8246). The P/N is F20.?

Just verifying.

[2DAMAX]

http:// tongue.gif :eek:

[hoot]

Maverick,

Yes.

[7mmSTW]

Looks good!!!

Does anyone know where I can find the square emblem that is on the 6500 chevy's? I think they would look great on the door as they are a whole lot smaller. I have seen them on a few 6500's but havent been able to talk to a dealer because none around here deal medium duties.

[pullinpower]

Hoot I was looking for an email from you saying I got the "goods".What happened, thought I had them? :D

[hoot]

Sorry pullinpower,

I put my e-mail address on the post. I had takers almost instantaneously. Hopefully others will order more than they need and sell off the rest. Why should everyone pay $11 s/h for one or two emblems.

[DSLPOWR]

Just got mine yesterday, as soon as weather cooperates I'll be installing them.... :rolleyes:

[ 02-27-2002: Message edited by: DSLPOWR ]</p>

[Tader Jack]

I got three of them last week . . . they are way, way too big. They are twice the size they need to be to look good. I don't want to become a billboard for Allison, so I created my own. Also note that these type of emblems don't stick very well to curved surfaces like some have tried. They will come loose if placed on a curved surface.

I refuse to use the door of my truck to display an ad for Allison. Honestly, it would be different if they were smaller like the Duramax logo, but these are HUGE. I will post the ones we have created ourselves. Much less overpowering. We printed our own at about 1/2 the size on 3M Scotchcal with an overlaminate that we normally use for vehicle graphic.

Jack Schultz, McKean, PA
jackschultz@adelphia.net

http://photos.yahoo.com/bc/jack_schultz2001

2001 Chevy Silverado, 4-WD, 2500HD, Crew Cab, Short Box
LT Trim, Black Onyx w/ Tan Leather
------------------------------------------------
Beltronics 980 Radar Detector • Blinder M-10 Plus Laser Radar Jammer
Lund Interceptor Wind Deflector • J&J Stainles Steel Tube Grill
Putco Stainless Steel Bed Rails • Access Roll-up Tonneau Cover • Pendaliner SR Bed Liner
DTA Stainless Running Boards and Mud Flaps • VentShades • Pop-Lok Rear Tailgate Lock
Lucerix Remote Control X-Mount Camper Mirrors • Unity Dual Door-mount Halogen Spotlights
Air-Lift Super Duty Ride Control w/ Dual Controller & Onboard Compressor
Tekonsha Voyager Trailer Brake Controller • Uniden 510XL PRO CB Radio, Wilson Antenna
Kennedy Diesel Headlight Harness with 4 Lamp Mode • PIAA Platinum Super White Headlight Bulbs
K&N Air Filter • FPPF Total Power Diesel Fuel Treatment • FPPF 8+ Cetane Improver
Amsoil 15W-40 Synthetic HD Diesel & Marine Engine Oil • Amsoil Series 2000 75W-90 Synthetic Gear Lube (GL-5)

------------------------------------------------

[pullinpower]

I'd like to see them Tader,I just bought one for the tailgate like Steve Cornell had done.would like to see yours for the doors.

[hoot]

Tader,

They're not too big.... your truck is too small. They are meant for the bigger trucks. I like mine on the tailgate. You do have to watch where you put them.

[NorCalDMAX]

Ok,
Well I received my Allison emblems today and after placing them strategically in the areas I had planned on, I am not as happy as I thought with the layout. So I went back to my original plan and put the Duramax one on the Tailgate as planned.(I have had no success with Image posting on the page so the pics are on my picture section of the website..sorry wanted to post pics on the page as you master FORUM Jedi's do.... :D )

With this said, I ordered 3. I want to keep one for the garage for whatever reason so the other 2 are for sale, You know the history from above how much they are and the S&H. I can send in a regular envelope. I would like to get $7.50 each.

E-mail me if interested. I can mail next day and I will trust you on your honor that you will mail me the proper funds.

[ 02-28-2002: Message edited by: NorCalDMAX ]</p>

[hoot]

$7.50 eh? Undercut me by .50c? Looks like a price war :D

[SGJ]

7mmSTW ,
I have checked at a couple different GM and Chev dealers , as well as Sterling , and Freightliner . All these trucks have Allison emblems on one model or another . At every place I get the same reaction . They look at me as if my head just fell off and rolled on the floor . Then they reluctantly start punching keys on their computers .After a few minutes they are stumped as to why they can't find them and they tell me to go to Allison . That is also a dead end as that is the first place I went to , and they sent me to the other dealers . An hour or two with any of their computers and I bet we could find them .I am still working on it and will post if I have any luck .
Tader Jack ,
I was interested in seeing pictures of your emblem , but I could not access your site from here for some reason to see if you posted them . :confused:

[7mmSTW]

Thanks SGJ!!

I was thinking of trying body shops that might work on the MD's. Surely they could order some. People gotta wreck them too. :eek:

[Maverick]

I got some emblems comming that look exactly like this. They are 1" high by 4" long. Should be here Sat. or first part of next week. Should look good on both of my white trucks.

http://www.picturetrail.com/gallery/view?p=999&gid=658730&uid=437876

You will have to cut and paste the address. UBB code is not enabled.

[ 03-01-2002: Message edited by: Maverick ]</p>

[SDWA]

Emblems or stickers/decals? Now 1" x 4" I would be interested in!

Scott

[Maverick]

They are decals. Vinyl graphics. Not puffy. You can stick them on curved surfaces.

[pullinpower]

Here is a link to what my tailgate looks like after the emblem install.How do you like the way I done the 2500HD emblem?

http://thedieselpage.com/images/ehaneyallison.jpg

If the link doesnt work I have a pic in my sig.

[ 03-06-2002: Message edited by: pullinpower ]</p>

[pullinpower]

Well I cant get the link for the pic to work,just check out my signature and look in the dmax folder and its the 4th one over. Tell me what you think of my setup.

[3-Fan]

Maverick,

Where would I be able to get some of those stickers that you are talking about?

I found a guy in Colorado that I am getting 1.5" x 6" Allison Transmission stickers from but they are all one color. Cheap too. $20 for a dozen.

[Maverick]

Well I got my decals on. Take a look. I think they look FANTASTIC. Two color. Dark blue and red. They are printed on a clear background so your paint color shows through. Let me know what you think.

3-Fan a reserved a set for you. Have 4 left. Can get more if needed. E-mail me if you want one.

Link= http://www.picturetrail.com/gallery/view?p=999&gid=658730&uid=437876&members=1

[mattb5150]

Are there any of these left for sale? If so I would like to buy one. If not is anybody else interested, if there are I may order a bunch and sell them close to my cost. Lets buy a bunch together and save the shipping and handling.

Matt B.

[FirstDiesel]

mattb5150

I'll go in on an order with you for emblems. I want 2 of them.

[pontiac_m18]

TO ANYONE INTERESTED: I have 2 duramax decals that i can get rid of.$6.50 each. Howard Email me at = howard_m18@yahoo.com ;) ;) ;)

[mdrag]

Pontiac,

I'll buy them both from you, check your email. :D

[wangotango]

Feel free to read Steve Cornells post from Feb 19th this year. 3rd message, same topic thread.
All answers revealed.

good luck

w/t

[wangotango]

I must now feel free to read the second page of this thread.

In doing so I have achieved "dorkness".

No further questions.

w/t

[TallyMax]

Hey you guys, I'd sure like to get my hands on about 3 of these Allison emblem beauties. If anyone's going to order, I'd be glad to share the shipping, etc. You can email me @ onerhodie@mindspring.com. Why the heck didn't General M do this to start with? :D :D :D

[mattb5150]

Maverick,

Do you have any of yours left? If not can you still get them, how much?

Matt B.

[Maverick]

mattb5150,

I can get you as many as you want. Send me an E-mail with Allison Decal as the subject. I delete anything not familiar to me. ;)

[Maverick]

Woodzie/mail.net66,

You sent me an E-mail but my reply's get sent back to me. You have an invalid address I guess. Try another computer or e-mail address.

[martiuk]

Steve Cornell can you tell me more about eh 3500 running lights installation? Part numbers and wiring?
Thanks
Mark

[johns]

I got these stickers about 3 months ago. They used to make a smaller white sticker with Allison Transmission on it. That one looked good next to the Duramax emblam on the door. There was an old thread shwoing that one. I called Service Graphics to order the small one. They only make the big black ones now. I took 6 of them. Put one on the stock tailgate (under the GMC emblem) and one on the 5er tailgate. I gave one away and have the other 3 in my cabinet in case I have to replace one.

They do look sharp on the tailgate.

[mattb5150]

FirstDiesel,

I'm going to go ahead and buy one from Maverick since he is offering. Why don't you go ahead and contact him also.

Matt B.