PDA

View Full Version : Overhead Console kit for Attitude display?



SHOPMAN426
04-11-2005, 13:49
Was wondering who makes the overhead console kit for the Attitude display? I've been looking at buying the Edge with Attitude set up. Any help is appreciated.

Thanks, Shopman426.
Mike. smile.gif

dmaxalliTech
04-11-2005, 14:06
good mount from socaldiesel.

You should be able to find it on www.kennedydiesel.com (http://www.kennedydiesel.com)

Not the cheapest thing, but hands down the finest.

olimaxx
04-12-2005, 21:15
you can get the mount at "everythingoffroad.com"

landshark
04-13-2005, 18:12
I used the pillar mount for my 02 Duramax in stead of the overhead set up. Primarily to keep my overhead pocket open for stuff and the pillar mount keeps the attitude monitor right in my eye sight with out looking up away from the road or trail that I am driving. I found my pillar mount at www.4wheelparts.com (http://www.4wheelparts.com)

guerrero
04-16-2005, 09:25
I have the socal diesel overhead mount for attitude monitor, but am unsure if the attitude mounts in from the front as viewed by the driver or just slides in to the back of the mount? It seems like it should go in from the front but the signal cable gets really pinched when pusing it in from that direction. Any help would be appreciated.

guerrero
04-16-2005, 09:26
I have the socal diesel overhead mount for attitude monitor, but am unsure if the attitude mounts in from the front as viewed by the driver or just slides in to the back of the mount? It seems like it should go in from the front but the signal cable gets really pinched when pusing it in from that direction. Any help would be appreciated.