Hill 4WD leveling Kit

[pushpole]

Just installed and leveled that's good. Could not get the caster adjustment back to factory specs. Anybody have this problem? What is the real effect of having caster out by .75 degrees but balanced on both sides? Toe and camber are at factory specs. Thanx

[LA DMAX]

pushpole, don't know much about the caster problem, but wanted to ask you how you like the set up? Some people say it's like cranking up your torsion bars 2 inches or so. What do you think? Sorry I couldn't help on the caster issue.

LA DMAX

[ 11-14-2002: Message edited by: LA DMAX ]</p>

[c5dura]

pushpole, I'm running the Hill leveling kit at the highest setting they recommend (2.5 inches or so). My truck was just re-aligned and my caster specs are as follows:

Factory Mine
Left 3.25 - 5.25 3.38
Right 3.75 - 5.75 3.95

I did notice that one of the 'adjusters' on one side of the truck is at the end of its travel.

[ 11-15-2002: Message edited by: c5dura ]</p>