Gauages install

[Grizz272]

Iam installing the turbo temp gauage and the boost gauage this weekend. I have one question. Should I use never-seeze on the fitting that goes in to the exhaust manifold? Or loktite so it willnot come out?

Thanks

[Idle_Chatter]

I don't think loctite is a good idea, Griz. I used high-temp neverseez. Since the fitting is tapered, it fits up pretty tight. Mine hasn't gone anywhere in 20K miles.

[a64pilot]

If you use locktite, don't use the red stuff. You may want to remove it sometime.