Warn Winch 15K mounted

[Pizza Man]

Here is the picture of the Warn 15K mounted on 3500 Dually.

http://photos.yahoo.com/theghost6600

[Ironhead]

Hey thats a pretty tough looking winch!!
Does that replace your front bumper? What did that set you back if you dont mind?

[Pizza Man]

No that is NOT a replacement bumber. Its a WARN Trans4mer(15K mount)mounting system. Really heavy medal and It does not stick out far at all.

If you look close you will notice that the winch is right up against the bumper.

Hard to deal with WARN retailers. but just get the part numbers from www.warn.com then order from your local dealer.
The 15K is salty but I have a special application for it...most guys with 1 ton can get away with the 12K..If you have a 2500truck you can get away with the 8500 or the 9500 probably!

The 15K just came out this past year and has 7/16" wire instead of the smaller style and has bigger brakes and drum size. You can double the pulling strength to 30,000lbs if you double up the cable with a shackel block.(basically a pulley with D ring and safety harness for the wire)

[NutNbutGMC]

^... Show me more of the front end winch, please. Couple of more pics would be a good thing. smile.gif

[Pizza Man]

Nutnbgmc....I'm gonna go take some more pics....I'll post em in a few...
I shoulda taking pictures during install. The whole front bumper comes off to get the mounting medal behind the bumper.

[Pizza Man]

Updated pictures of the warn 15k are ready to be viewed...If you have any other questions let me know!

http://photos.yahoo.com/theghost6600

[ 03-24-2002: Message edited by: Pizza Man ]</p>

[NutNbutGMC]

^.....Buckwheat say tank u !