SoCalDieselNewbie
11-01-2002, 19:33
I have two designs for replacement pieces for my overhead console that I would like machined.
The first piece is the cover for the overhead console cubby that covers the area containing the OnStar unit. I'd like to put the computer controller for an Aux tank and a Fuel gauge for a Propane tank up there but angled to face the driver.
The second piece is to replace another part of the overhead console. This time, it is the cover for the garage/gate opener cubby.
I'd like to put an angled bank of illuminated rocker switches (I found some beauties by the way but they are big) up there for all of my aux driving lights, my reverse lights, for a parking/running light flasher, for a brake light cutoff and, finally, a switch for the high idle.
I can provide the plans for all part in CAD for a guy with a CNC mill.
Thanks in advance for all replies,
Diesel Newbie
[ 11-01-2002: Message edited by: SoCalDieselNewbie ]</p>
The first piece is the cover for the overhead console cubby that covers the area containing the OnStar unit. I'd like to put the computer controller for an Aux tank and a Fuel gauge for a Propane tank up there but angled to face the driver.
The second piece is to replace another part of the overhead console. This time, it is the cover for the garage/gate opener cubby.
I'd like to put an angled bank of illuminated rocker switches (I found some beauties by the way but they are big) up there for all of my aux driving lights, my reverse lights, for a parking/running light flasher, for a brake light cutoff and, finally, a switch for the high idle.
I can provide the plans for all part in CAD for a guy with a CNC mill.
Thanks in advance for all replies,
Diesel Newbie
[ 11-01-2002: Message edited by: SoCalDieselNewbie ]</p>