catch-all floor mats, not staying down

[buelldude]

Hey,
I have a set of mats from CATCH-ALL, I like them but the screw in hold downs didn't last long. I was wondering if anyone has info on how to get hold of them. I need a fix for them coming up. If anyone has had this problem and fixed it give me a yell.

[ 04-07-2003: Message edited by: buelldude ]</p>

[TxDoc]

Possibly these:
http://www.linktotheweb.com/06auto/floor_mat_clips.htm

or metal:
http://www.mgrv8.com/equipment.html

[ThePend]

Not sure what the Catch All mats are like, but maybe you can try and stick a few strips of velcro to the bottom of the mats which in turn should grab hold of the carpet. Might work...

[Burner]

I had the exact same problem. After "one" duck hunting weekend I figured out how to fix'em. I took off the carpet, got rid of the screws and changed the lettering just a little. They are now all rubber, non-slip, easy clean up and don't hold odor. I named e'm H-u-s-k-y. ;)


However, if you plan on keeping them, the velcro Idea sounds pretty good. You may be able to sew it to the bottom. I think the glue will most likely fatigue off, shortly.

Burner -----&gt;
:D :D