PDA

View Full Version : FSD wire harness extension


Schuylkill-trans
07-14-2004, 08:38
FSD wire harness extension PN# 30882 Stanadyne part.Gives about 8" of harness.List 35.00.
Spindrift
07-14-2004, 09:40
Sure Kill,

Here's a welcome to a new member from the City of Brotherly Love.
Barry Nave
07-14-2004, 15:46
8" does not give much opt. to where you would mount the cooler.
And welcome :D
You will find out soon that most will mount the PMD on a cooler and run the cooler in front and out of the heated Eng. bay.
I run a FSD cooler on the intake and have only once replaced, should say retorque the screw's on the driver. Soon to hit the 60k mark :D
Low_Bridge
07-14-2004, 15:54
Does that give you male & female ends? To plug into existing plug?

I'd rather get that and legnthen it to reach in the cab than mod the one already on the truck.

Found a good source for it? Competively priced? I I also need a #5 resister for my relocation.

Bill

[ 07-15-2004, 02:23 AM: Message edited by: Bill D'Addio ]
Kennedy
07-15-2004, 05:42
So, when someone here gets one in hand, please share with the rest here what the harness REALLY is.


Rather than have many go out and buy something that doesn't fit the bill...
Schuylkill-trans
07-16-2004, 04:59
I have one in hand.It has male and female end with a grd wire and two other wires that hook to the top of the pump.
Low_Bridge
07-16-2004, 06:43
Thank You. Did you use it as an extension itself or did you legnthen it?
gmctd
07-16-2004, 09:00
Sounds more like the inj pump harness - connects engine harness to FSD\PMD, Black ground wire to screw on top of pump, Black and Red wires to Fuel Solenoid. Which the FSD\PMD drives.

Supposed to be shipped in box with each new FSD.
Schuylkill-trans
07-16-2004, 09:49
HMMM. I may of given out some wrong info.It does look like a pump harness that gmctd mentions.Are newbies allowed one mistake?
gmctd
07-16-2004, 10:56
Much better to build an extender with that new harness than an unknown, right? :cool:
Kennedy
07-16-2004, 12:31
:rolleyes:
Low_Bridge
07-16-2004, 17:39
Of course, some of us can't look good with out members like you & me. The people on this forum are great & very, very patient.

"be patient of the young, the new & the old. For at some point in our life we will walk in each pair of those shoes."

(I'd still like to see a picture of one that works)
Low_Bridge
07-20-2004, 12:35
Wow Thanks Bill,

I found the image below on the following article: New Products Link (http://www.62-65-dieselpage.com/newprod.htm)

http://www.62-65-dieselpage.com/newprod.htm


http://www.62-65-dieselpage.com/images/FSDext2.jpg