PDA

View Full Version : Gauge Question



WillowCreekStable
01-01-2003, 13:04
I need to buy some gauges to go with the Hot Juice I just bought. Can anyone suggest make/models that closely match the stock

NickLeinonen
01-01-2003, 16:08
the vdo vision series and the isspro ev series both match the factory gauges quite well..

http://www.vdona.com

http://www.isspro.com

i have some pics of the vdo vision gauges that i have in my tahoe in the link in my sig. i have mine backlit green, but clear and red also come with them.

WillowCreekStable
01-03-2003, 08:35
Thanks these both look good. Hope the snow stops soon so I can go play with my hot juice......

Idle_Chatter
01-03-2003, 09:18
WillowCreek, Kennedy Diesel can hook you up with gauges, necessary connections and an A-pillar pod as a complete package. Got mine there, and am very happy with the Isspro boost and egt in a two gauge pod.

OC_DMAX
01-03-2003, 09:39
Idle_Chatter,

I like the looks of the Isspro gauges and dual pod A-pillar mount. Have you had any problems with the gauges (or associated electronics) emitting any audible high frequency noises?

I am interested in the model of Issopro gauges that you have, but I had read somewhere (about a year ago) that they were producing some annoying noises.

Thanks,
Alan

Idle_Chatter
01-03-2003, 10:07
OC_Dmax, none that I've noticed. I read a lot of discussion on the high-pitched noise from the Isspro egt signal conditioner, too. I have that box mounted on velcro under the dash near the e-brake pedal and haven't heard a peep since installation. I don't know if some people are more or less sensitive to background sounds or not. I was a submarine sailor and pretty much ignore any background sounds that are "normal" or constant. The installation went pretty well (see my "Got Gauges" thread for the lost pipe tap) and I'm very pleased with the appearance and performance of the gauges.