mackin
12-29-2002, 17:57
Since we are hashing back in forth on subjects lets toss this into the mix......Anyone hear of this,Mass Air replacement mod????
Kinda sucks you would have to do with out stock box......
=>SYSTEM FEATURES:
*
Engineered specifically for popular electronically fuel injected 1996-2003 GM V-6, V-8 gasoline powered and 2000-01 Duramax diesel powered trucks/SUVs (w/o factory integrated air box)
*
"Plug and Play" easy installation in 10-15 minutes
*
Works with factory and aftermarket electronics, programmers, modules, air filters, cold air intake systems, throttle bodies, ignition systems, headers, cat-back exhaust systems, pulleys, roller high ratio roller rocker arms, superchargers, turbochargers, nitrous, radical cams and heads, and larger displacement engines. Custom calibrations will be required for larger fuel injectors (available direct or from your nearest GMS dealer)
*
Dyno proven to add 10-23 rear wheel horsepower
*
Flow bench tested to provide 47% more air than stock mass airflow sensors
*
Improves mileage
*
Improves power, towing capability, and throttle response from 2000 RPM on up
*
Rugged, OEM quality fit and finish
*
50 state street legal (CARB EO #D-471) through 2003
*
Will not void factory warranty
*
Industry leading 3-year limited warranty
WELL !!!!!!!! All for A measly $415 bucks....JK you'll be needing one of these.....
MAC
:D ;) :D
OH ,I guess you might want the link too...=>http://www.granatellimotorsports.com/gmmaftruck.htm
[ 12-29-2002: Message edited by: mackin ]</p>
Kinda sucks you would have to do with out stock box......
=>SYSTEM FEATURES:
*
Engineered specifically for popular electronically fuel injected 1996-2003 GM V-6, V-8 gasoline powered and 2000-01 Duramax diesel powered trucks/SUVs (w/o factory integrated air box)
*
"Plug and Play" easy installation in 10-15 minutes
*
Works with factory and aftermarket electronics, programmers, modules, air filters, cold air intake systems, throttle bodies, ignition systems, headers, cat-back exhaust systems, pulleys, roller high ratio roller rocker arms, superchargers, turbochargers, nitrous, radical cams and heads, and larger displacement engines. Custom calibrations will be required for larger fuel injectors (available direct or from your nearest GMS dealer)
*
Dyno proven to add 10-23 rear wheel horsepower
*
Flow bench tested to provide 47% more air than stock mass airflow sensors
*
Improves mileage
*
Improves power, towing capability, and throttle response from 2000 RPM on up
*
Rugged, OEM quality fit and finish
*
50 state street legal (CARB EO #D-471) through 2003
*
Will not void factory warranty
*
Industry leading 3-year limited warranty
WELL !!!!!!!! All for A measly $415 bucks....JK you'll be needing one of these.....
MAC
:D ;) :D
OH ,I guess you might want the link too...=>http://www.granatellimotorsports.com/gmmaftruck.htm
[ 12-29-2002: Message edited by: mackin ]</p>